Mayline Technology Beltway - Manual

PRINTED IN USA 1 6/1 2
I766
TECHNOLOGY BELTWAY EZTB**
1 . Push the ends of the table together.
Leave a gap between the tops to accept
the Beltway.
2. Set the Beltway betwe e n the two
tables and slide the tables firmly against
the Beltway.
Lip Note:
Make sure the table is pushed firmly
against the Beltway, and the lip is
resting on the top of the worksurface.
G
F
E
D
C
B
A
ITEM QTY DESCRIPTION
A 4 BLANK DATA CUTOUT COVER
B 8 #1 0 X 3/4 PHILLIPS PAN HEAD PARTICLE
BOARD SCREW
C 2 3/8-1 6 X 1 .5 PHILLIPS TAPERED HEAD
MACHINE SCREW
D 2 NYLON INSERT LOCKNUT, 3/8
E 4 GROMMETS
F 2 HOLE COVERS
G 2 WIRE CLAMPS
Leg
Gusset
Table Top
Beltway