Mayline Technology Wall User Manual
Page 2
Advertising
PRINTED IN USA
2
61 9 N. Commerce P.O. Box 728, Sheboygan, WI 53082-0728
www.mayline.com
800-822-8037
Fax 920-457-7338
9/4
I767 REV 2
4. To install the power block first lift the plastic
holder from the unit.
5. Place the power block between the holder halves
and snap closed.
6. Plug the wiring into the block and replace back in
the unit. Check power conections.
7. Replace the cladding by reversing steps 2 and 3.
NOTE:
ELECTRICAL COMPONENTS SOLD
SEPARATELY.
NOTE:
REMOVE CLADDING AND FRONT PANELS
TO ACCESS THE INSIDE OF THE UIT.
FASTEN UNITS TOGETHER USING E, F,
AND G. USE THE PROVIDED HOLES TO
ATTACH.
Advertising