Mayline 200 Series Mid-Back Chair - Manual

Item number: UL230MBLK / UL230MBUR
E X E C U T I V E M I D - B A C K C H A I R
1. To Adjust Seat Height:
While seated, lean forward and reach under the
right side of the chair to find the handle. Lift the
handle and raise your body up slightly to allow the
chair to raise to the desired height. To lower the
seat, lift the handle while applying more weight
downward on the seat. The chair will descend until
the handle is released or the chair reaches the
bottom position.
2. To Operate Tilt Lockout:
While seated, reach under the left side of the chair
to find the lockout bar. Slide the bar to the left (or to
the outside), all the way out allows the chair to tilt
backwards. To lock the chair in the vertical
position, sit upright and push the bar to the right
(or the center of the chair).
3. To Adjust Tension on The Tilt
Mechanism:
Reach under the front center of the chair, grasp
the round knob and turn counter - clockwise to
make the tilt mechanism firmer (stiffer). To loosen
the tilt mechanism, turn the knob clockwise until
the desired resistance is felt.
O P E R AT I N G I N S T R U C T I O N S
619 N. Commerce St, PO Box 728, Sheboygan, WI 53082-0728
www.mayline.com 800-822-8037 Fax 920-457-7388