Mayline 8' Conference Table User Manual
Page 4
Advertising
12.
Position worksurface on base assembly and
fasten using screws (E5) through legs, spreader and
connector panels.
13.
Insert slam latch (E7) into access panels (6 & 7).
14.
Install the access panels into the table base by
inserting panel tabs in access panels (6 & 7) into trough
(4) slots. Pivot panels up until latch catches on spreader.
15.
Insert grommet (11) into hole in worksurface (5) and
fasten using screws (E10).
16.
Attach standoffs (E9) to wire cover (12).
17.
Adhere felt pads (E8) to the bottom of standoffs (E9).
(4)
Advertising