MB QUART QUBFour - Manual (Page 6)

BLUETOOTH CONNECTION
When the speaker is turned on, you should hear a voice prompt and the pairing LED on
the front of the speaker will fl ash indicating that pairing mode is activated and it is search-
ing for a Bluetooth source.
Go to the Bluetooth menu of your source device and connect to QUBFour from the list of
devices. If asked for a code, enter 0000.
Once the connection is achieved, the pairing LED will stop fl ashing and the speaker will
emit two short beeps.
You are now connected and can play from your source.
6
Make sure that no other source in range is connected. Only one connection can be made
at a time, The speaker may automatically connect to a source it has been paired with in the
past.
Turn off the speaker, then on again. Try pairing again.
Make sure the source is Bluetooth compatible and that the Bluetooth is activated.
Review your source device documentation for Bluetooth pairing instructions.
TROUBLE CONNECTING?
7