MBT Lighting CX1616 - Manual (Page 6)

The audio effect function allows you to program specified channels to an
internal audio bank. Only one scene can be programmed using the Audio
Effect and can only be activated by an audio source. This function will only
work if “Audio Mode” is activated while a chase pattern
is running.
Step 1:
Turn off any chase patterns that may be running, by
pressing the Blackout Button.
Step 2:
Press the Manual and Program Buttons to enter the program
mode.
Step 3:
Use the channel sliders to select the channels you want
activated by the “Audio Effect”. Be sure the channels you
wish to program are set to their maximum levels and
the rest set to their minimum level.
Step 4:
Once you have set your channels, tap the Audio Button to
set this scene into the buffer memory.
 Running Chase Patterns and Scenes
You may run any of the built in chase patterns or one of your preset chase
patterns in four different modes “Audio”, “Speed”, “Glide”, or “Tap Sync”.
The next section of the manual will detail the proper operation of these four
modes.
Running a Chase Pattern with the Speed Slider:
This mode will allow you to run your patterns according to the speed slider
adjustment. You may change the speed Slider adjustment at any time while the
chase pattern is running. Your adjustments to the speed slider will affect the
chase pattern in real time.
Step 1:
Select the pattern button(s) that stores the chase patterns or
scene you wish to activate. The select patterns LEDs will
glow indicating that pattern has been activated.
Step 2:
Once you have selected your chase patterns, use the speed
slider to control amount of time it takes the chase to
progress from scene to the next. This adjustment can range
from the minimum of 1/10 of a second progression to a
maximum of 10 minutes progression.
Running a Chase Pattern with the Audio Slider:
is mode will allow you to run your patterns to the beat of music. You may
change the Audio Sensitivity at any time while the chase pattern is running.
Your adjustments to the speed slider will affect the chase pattern in real time.
Step 1:
Press the Audio Button to activate the Audio Mode.