MBT Lighting CA1612 - Manual (Page 12)

4.TROUBLE SHOOTING
A.)Colors don't respond when faders are moved.
Make sure address is correct. If the XRL cable is more than 30 meters,
check if it is terminated properly.
B.)Mirrors don't respond when faders are moved.
Make sure address is correct.Make sure speed is adjusted,if available,
for faster movement.Not all fixtures have a speed adjustment. If the XRL
cable is more than 30 meters,check if it is terminated properly.
C.)Scenes don't run after record them
Make sure to press MIDI/Add button before pressing Scene button.
LED's should blink after pressing each Scene button.Be sure you are in
the correct Bank that has scenes recorded.
D.)Scenes don't run correctly as recorded them
Made sure all fixtures were recorded.Make sure you are in the correct
bank that has scenes recorded . If the XRL cable is more than 30 meters,
check if it is term inated properly.
E.)Chase don't run after record them
Make sure to press MIDI/Add button after pressing Scene button . LED
should blink after pressing MIDI/Add button.
Be sure you are in the correct Chase that has steps recorded.If in Auto
Mode,did you adjust speed after selecting Auto? Is Fade time to long
for speed selected ? If the XRL cable is more than 30 meters,check if it
is terminated properly.
ECD eclaration of Conformity
We declare that our product complies with the following specification and
bears CE mark in accordance with the provision of the Electromagnetic
Compatibility(EMC) Directive 89/336/EEC.
EN55014-1:1993,EN61000-3-2:1995,EN61000-3-3:1995
EN55014-2:1997 CATEGORYII
EN61000-4-2:1995,EN61000-4-3:1995,EN61000-4-4:1995
EN61000-4-5:1995,EN61000-4-6:1995,EN61000-4-11:1994
&
Harmonized Standard
EN60598-1:1993
Safety of household and similar electrical appliances
Part1:General requirements
Following the provisions of the Low Voltage Directive73/23/EEC and
93/68/EEC.