Meade Instruments LX600 - Manual (Page 16)

the directions that scroll on the second line. When satisfi ed with
the Help provided, press MODE to return to the original screen
and continue with the chosen procedure.
Tip: When an astronomical term appears in [brackets], press
ENTER for a defi nition or more detailed information. Press
MODE to return to the scrolling AutoStar II Help display.
If a celestial object’s name appears in brackets (and your
telescope is aligned), press ENTER and then GO TO to slew
the telescope to the object.
j
Coil Cord Port: Plug one end of the AutoStar II coil cord (Pg.
14, Fig. 2, 10) into this port located at the bottom of the AutoStar
II handbox.
1)
Coil Cord: Plug one end of the AutoStar II coil cord into the
HBX port (Pg 10, Fig 1 inset, F) of the computer control panel of
the telescope and the other end into the AutoStar II coil cord port.
See #9 above.
1!
Utility Light: Use this built-in red light to illuminate star
charts and accessories without disturbing your eye’s adaptation
to darkness. Press “0” to turn the light on and off.
AutoStar #497 HANDBOX
AutoStar II F
eatures
16