Meade Instruments ETX-LS Software Update Instructions - Manual

ASU SOFTWARE UPDATE INSTRUCTIONS - LS TELESCOPE
www.meade.com Page 1 of 20 Rev. 26-Oct-2009
1. UPDATING LS TELESCOPE APPLICATION
SOFTWARE
1.1. U
PDATE
LS
VIA
USB
1.1.1. Connect your LS telescope to the PC and power on.
1.1.2. Run Autostar Updater (ASU) from the PC desktop
shortcut or the
Start > All Programs > Meade > Autostar Updater menu.
1.1.3.
Press “Upgrade Autostar Software Now” to update the LS
telescope application software.
1.1.4.
The Updater will report that the LS telescope is
connected. Press “OK” to continue.