Meade Instruments TE388W - Manual (Page 10)

GETTING STARTED
WEATHER WINDOW
This unit is capable of detecting the atmospheric pressure
changes. Based on collected weather data, it forecasts the
weather for the next 12 to 24 hours.
When the
display
shows...
Forecast is... Sunny Cloudy Rainy
Heavy
Rainy
Snowy
Heavy
Snowy Partly
Cloudy
NOTE: The weather forecast accuracy is approximately 70%.
The main unit display shows forecasted (predicted) not
current conditions. The SUNNY icon indicates clear
weather, even when displayed during the nighttime.
TEMPERATURE WINDOW
The main unit supports up to 3 remote sensors, corresponding to
a separate channel of the temperature display. The temperature
can be displayed in Celsius (ºC) or Fahrenheit (ºF).
A temperature alert function is available for all channels. It can
be programmed to sound if the channel temperature exceeds or
falls below the pre-set upper and lower limits.
REMOTE SENSORS STATUS
The wave icon above the current channel icon shows the
connection status of the corresponding remote sensor:
Icon Status
Searching for the signals from the
remote sensor
Corresponding remote sensor signal
received successfully
No signals received for over 1 hour
SEARCH FOR REMOTE SENSORS
• The main unit can be manually activated to search for the
signals from remote sensors by pressing and holding
DOWN (? ) button.
0 1