MEElectronics Air-Fi Metro2 AF72 - Manual (Page 12)

MULTIPOINT (Continued)
4. TURNING MULTIPOINT OFF
We recommend keeping multipoint off if you don’t use this feature, which will
result in the best connectivity and battery life. Disable multipoint as follows:
Long press and — buttons in standby mode (see Section 1a on Page 9 for
standby mode instructions) and release them when you hear four beeps of
decreasing tone.
Note: Pressing the answer button on a connected device with a call coming in
will activate the phone handset, not the Metro2. Long press for 2 seconds
to transfer the call to the Metro2.
PHONE FUNCTIONALITY & CONTROLS
1. CONTROLLING PHONE CALLS
HEADSET
STATUS
FUNCTION OPERATION TONE
Incoming
call
Answer call Short press
once
Two increasing
tones
Reject call Long press
for 2 seconds
Two decreasing
tones
Active call End call Short press
once
Short tone
One active
call, one
incoming
call
Answer incoming call
and end current call
Short press
once
N/A
Answer incoming call
and place current call
on hold
Double press
button
N/A
Two active
calls
Switch between
active calls
Double click
button
N/A
End current call and
switch to call on hold
Short press
once
N/A
10