MEElectronics Air-Fi Journey AF16 - Manual (Page 4)

POWER ON/OFF
To turn on, press and hold the Multifunction button for approximately 2
seconds. The headphone will produce an ascending tone and the blue LED
light will flash.
To turn off, press and hold the Multifunction button for approximately 4
seconds. The headphone will produce a descending tone and the red LED
light will flash.
PAIRING WITH BLUETOOTH DEVICES
*** Your headset must be paired to a Bluetooth device before it can be
used. It is only necessary to pair your headset once with each device. ***
1) With the headset turned off, press and hold the Multifunction button for
4 seconds until you see the red and blue lights flashing in an alternating
manner to enter pairing mode. Pairing mode will remain active for 3
minutes or until paired.
2) Open the Bluetooth menu on the device you wish to pair (see Locating
the Bluetooth Menu on page 4 for more details). Some devices require
you to select “Search for Devices” or “Add New Device” in order to create a
Bluetooth pairing.
3) Wait until you see “AF16” on your device screen.
4) Select “AF16” on your device and follow any further prompts to pair. Use
0000 if a pin is required. Once pairing is complete and a connection is
established, the blue LED light will flash several times.
3