Memmert ICP Compressor-cooled incubators - Manual (Page 18)

18 D30374 | Date 10/2014
Delivery, transport and setting up
3.6.2 Tilt protection
Attach the appliance to a
wall with the tilt protection.
The tilt protection is included
in the delivery.
1. Screw the tilt protection
to the rear of the appli-
ance as illustrated.
2. Bend the tilt protec-
tion upwards by 90° in
the desired distance to
the wall (consider the
minimum distance to the
wall, see page Fig. 8).
3. Drill a hole, insert a plug
and screw the tilt protec-
tion to a suitable wall.
≥ 5 cm ≥ 5 cm
≥ 20 cm