Brada Appliances MPN1-08CR - Manual (Page 11)

OPERATING INSTRUCTIONS
6 WATER DRAINAGE:
During dehumidifying mode:
- Remove the drain plug from the back of the unit,
- You can also install the drain connector (5/8" (1.58cm) universal female mender) with 3/4" (1.9cm)
hose (locally purchased by consumer) for garden hose use.
attach a section of drain hose (included with
this unit) to the hole. Place the open end of the hose directly over the drain area in your
basement floor or in a water container (see Fig.4 & 5).
When the water level of the bottom tray reaches a predetermined level,
and the unit stops air conditioning/dehumidification process.
However, the fan motor will continue to operate (this is normal). Carefully move the unit to a drain
location, remove the bottom drain plug and let the water drain away (Fig.6). Restart the machine
until the P1 symbol disappears. If the error repeats, call for service.
-
NOTE:
" "
the unit beeps 8 times,
the digital display area shows P1
" "
Remove the
drain plug
Fig.4
Continuous
drain hose
Fig.5 Fig.6
The air conditioner must be operated within the ambient temperature range indicated below:
MODE ROOM TEMPERATURE
COOL
DRY
OPERATING CONDITION
>13 C/54 F O O
>17 C/62 F O O
10