Memmert HPP 108/749 Constant climate chamber (Generation 2003) - Manual (Page 23)

23
Operation and control
5.4 Basic information on operation
5.4.1 Switching appliance on and off
The constant climate chamber is switched on and off by pressing the main switch / push-turn
control on the front of the appliance:
► Switching on: press the main switch so that it comes out of the appliance ( Fig. 14 ).
► Switching off: press the main switch so that it retracts back into the appliance ( Fig. 15 ).
Fig. 14 Switching on the constant climate
chamber
Fig. 15 Switching off the constant climate
chamber
5.4.2 User interface/ controller
In normal and programme modes, the desired parameters are entered on the operating panel
of the controller on the front of the appliance ( Fig. 16 ). Basic settings, as well as those for time
and printing, can also be made here. In addition, programmed and current parameters are
displayed, as well as warning messages:
set
off
on push card
4
3
2
1
mb
IN 1 IN IN 1 IN 2 OUT
PRINT SETUP
loop
t3
t4 t2
t1
on
off
Mo Tu We Th Fr Sa Su
°C °C
MIN
AUTO
MAX
h
rh
DEFRO STERI
%
1 2 4 3 5 6 7 8 9 10
11 12 14 13 15 16 17 18
Fig. 16 Operating panel
1 Time display
2 Programme mode display (see page 29 )
3 Interior lighting active (optional)
4 Display: Appliance locked with user-ID
card (see page 55 )
5 Display: appliance is heating up
6 Temperature display
7 Display: appliance is cooling down
8 Temperature monitoring warning (see
page 43 )
9 Temperature monitoring (see page 43 )
10 Humidity display
11 Display: Appliance is humidified
12 Warning: Water tank empty
13 Interior light (optional)
14 Chipcard reader
15 Operating mode display (see page 24 )
16 Main switch /push-turn control
17 Set key
18 Alphanumeric text display for error and
status messages