MK Diamond IXL 5" Dust Shroud - Manual (Page 2)

Silica Dust Warning
Grinding/cutting/drilling of masonry, concrete, metal and other materials can generate dust, mists and fumes containing
chemicals known to cause serious fatal injury or illness, such as respiratory disease, cancer, birth defects or other repro-
ductive harm. If you are familiar with the risks associated with the particular material being cut, review the material safety
data sheet and/or consult your employer, the material manufacturer/supplier, governmental agencies such as OSHA and
NIOSH and other sources of hazardous materials. California and some other authorities, for instance, have published lists
of substances known to cause cancer, reproductive toxicity, or other harmful effects. Control dust, mist and fumes at the
source where possible. In this regard use good work practices and follow the recommendations of the manufacturer/sup-
plier, OSHA/NIOSH, and occupational and trade associations. When the hazards from inhalation of dust, mists and fumes
cannot be eliminated, the operator and any bystanders should always wear a respirator approved by OSHA/MSHA for the
material being cut.
Cup Wheel 1/16" - 1/8"
© 2014 All Rights Reserved. Images and specifications subject to change without notice. 5in Shroud Instruction Sheet Part # 170861 (03/14)
1
2
3
4
Shim
Cup Adapter Nut
Large Washer
Large Washer
Hex Nut
5-inch Shroud Part List
Item Description
Part #
1 Clamp, Hose, 1-15/16 to 2-1/4 162816
2 Assembly, Cup Nut 167149
3 Shroud, 5" 170791
4 Adapter Bushing, 5" Shroud 170792
NOTE: Use washer(s) to achieve proper distance if
needed. As cup wheel is worn use additional
washer to achieve distance needed.
5" Dust Shroud
INSTRUCTION SHEET