MK Diamond MK-DDG - Manual (Page 14)

14
BEFORE STARTING
FOR GASOLINE ENGINE
FOR ELECTRIC MOTOR
1. Use correct diamond wheel for grinding conditions.
2. Ensure wheel mountings are clean and bolts are tightened securely.
3. Check for adequate water flow.
TO BEGIN GRINDING OPERATION
1. Place grinding wheels on surface.
2. Start and warm up engine.
3. If application requires water, adjust water flow.
4. Adjust speed as required by application.
DAILY MAINTENANCE
1. Check engine oil level.
2. Check and clean air filter.
3. Lubricate grease points.
4. Check belt tension
5. Check for fluid leaks and loose or damaged parts.
BEFORE STARTING
1. Choose correct diamond wheels for the job condition.
2. Ensure grinding wheel mountings are clean and the
retaining bolts are securely tightened.
3. Check for adequate water flow.
TO BEGIN GRINDING OPERATION
1. Be sure the grinding wheels are positioned over the work area.
2. If application requires water, adjust water flow.
3. While holding securely to the handlebar,
turn power switch to "ON" position.
DAILY MAINTENANCE
1. Lubricate grease points.
2. Check belt tension.
MK-DDG SERIES START