MK Diamond SDG-7 - Manual (Page 8)

8
In case of a malfunction or breakdown, grounding provides a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This tool is equipped with an electric cord having an equip-
ment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
MK-SDG-7 SAFETY
GENERAL SAFETY
• DO NOT operate or service this equipment before reading this entire manual.
• This equipment should not be operated by persons under 18 years of age.
• NEVER operate this equipment when not feeling well due to fatigue, illness or taking
medicine.
• NEVER operate this equipment under the influence of drugs or alcohol.
• Whenever necessary, replace nameplate, operation and safety decals when they become
difficult to read.
• ALWAYS store equipment properly when it is not being used. Equipment should be
stored in a clean, dry location out of the reach of children.
• NEVER leave the machine unattended. Turn off electric motor when unattended.
ON / OFF
Caution must be observed while servicing the machine. Rotating parts can cause
injury if contacted.
ELECTRICAL REQUIREMENTS AND GROUNDING INSTRUCTIONS
WARNING In order to prevent potential electrical shock and injury, the following electrical
safety precautions and symbols should be followed at all times!
• NEVER operate the machine in an explosive atmosphere.
Failure to follow instructions in this manual may lead to serious injury. This equipment is to be oper-
ated by trained and qualified personnel only. The following safety guidelines should always be used
when operating the MK-SDG-7.
DANGER
RULES FOR SAFE OPERATION
CAUTION