193 series concrete mixer safety – MK Diamond Canoga 193 Electric User Manual

Page 7

Advertising
background image

7

193 SERIES CONCRETE MIXER

SAFETY

ON

(

(

)

)

ON

(

(

)

)

ON

(

(

)

)

ON

(

(

)

)

CAUTION must always be observed while servicing this mixer. Rotating parts can cause

injury if contacted.

Ensure that any electrical extension cord is protected against damage. Always ensure that

the electrical extension cord is not trapped underneath the mixer.

DO NOT allow extension cord to come into contact with water or fluids. DO NOT spray water onto

electric motor.

DO NOT allow extension cord to come into contact with water or fluids. DO NOT spray water onto

electric motor.

ON

(

(

)

)

ON

(

(

)

)

This mixer is intended for the production of concrete. Mixer must be used only for its

intended purpose.

This mixer is not suitable for the mixing of flammable or explosive substances.

NEVER operate the mixer in an explosive atmosphere.

ON

(

(

)

)

ON

(

(

)

)

ON

(

(

)

)

ON

(

(

)

)

ON

(

(

)

)

ON

(

(

)

)

ON

(

(

)

)

ON

(

(

)

)

Before starting the mixer, check that all guards are in position and correctly fitted.

Keep area around the mixer clear of obstructions and trip hazards which could cause

persons to fall onto moving parts.

ALWAYS ensure mixer is on level ground before mixing.

Become familiar with the controls of the mixer before operating.

Ensure the drum is rotating while filling and emptying the drum.

ALWAYS disconnect AC power plug from power source before moving mixer.

Make sure the OFF/ON power switch on the electric motor is always in the OFF position

before inserting the mixer’s power plug into an AC receptacle.

Operate electric motor only at the specified voltage indicated on the nameplate.

Advertising