MMF POS Ingenico iPP320 or iPP350 Handheld - Manual

Transaction Terminal Stand (P/N:225-7589-04)
Quick Installation Instructions
Designed for Ingenico® iPP320 or iPP350 Handheld
INSTALLATION
1. Remove stand from packaging box. Firmly secure the
base pole by bolting four (4) screws through the base
plate to a flat counter surface. (Screws are not
included as they need to suit your specific desktop or
platform thickness) .
2. Mount payment terminal to stand by sliding in place,
aligning the two holes in the top of the Ingenico®
iPP320 / iPP350 unit to the two holes of the stand’s
mounting plate. Also, make sure the hook on the
bottom of the mounting plate is attached to the
bottom slot under the Ingenico® ipp320 unit.
3. Secure the terminal by placing the security bracket
on top of the terminal and tightening the two button
head cap screws behind the mounting plate using the
Allen Wrench provided in the kit.
4. Secure the stand’s tilt adjustment as desired by
tightening the side thumb nut on the side of the
stand.
5. Make cable connections as needed . Guide cable
connections down and out through the bottom
opening.
For parts and/or additional accessories, contact your supplier or visit our website at www.mmfpos.com TTS-09 Inst . Sheet (10-1-2013) 531995300
COPYRIGHT BY MMF POS COMPANY,
WHEELING, IL
TOOLS AND HARDWARE REQUIRED
• One (1) Allen Wrench is included with kit to tighten the
button head cap screws from behind the mounting plate.
• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.
• Phillips Head Screwdriver or power drill will be required
to mount stand to surface (if necessary).
Basic Overview
Note: Images are not to scale.
Clearance
Cable
Slot
Thumb
Nut
2” Height Stand
P/N:225-7589-04
R
e
p
la
c
e
m
e
n
t
P
a
r
t
s
SPECS
Rotation: 180°around display pole
Overall Height & Tilt Adjustment (without Terminal) :
•30⁰ Tilt= 4 ¾” high
•45⁰ Tilt= 5 ½” high
Base Dimensions: 5” x 5”
Construction: 18 gauge Steel
Finish: Textured powder coat
Cable Management: Designed with openings for easy and convenient
cable access and routing.
Color: Black
Holes to
secure
Ingenico®
ipp320
terminal
to stand
(Screws
included
in kit)
Designed
for
Ingenico®
iPP320 &
iPP350
Cable
Management
Hole
Hook
Back View Front View
Counter
Base
Security
Bracket
Thumb Nut
P/N: 821-1540-04