MMF POS Verifone VX810 & VX820 Handheld - Manual

Transaction Terminal Stand (P/N:225 Transaction Terminal Stand (P/N:225--7591 7591--04) 04)
Quick Installation Instructions
Designed for Verifone® VX810
INSTALLATION
1. Remove stand from packaging box. Firmly secure the
base pole by bolting four (4) screws through the base
plate to a flat counter surface. (Screws are not
included as they need to suit your specific desktop or
platform thickness) .
2. Mount payment terminal to stand by sliding in place,
aligning the two holes in the top & bottom of the
Verifone® VX810 unit to the two holes of the stand’s
mounting plate.
3. Secure the terminal by tightening the two button head
cap screws behind the mounting plate using the Allen
Wrench provided in the kit.
Basic Overview
Note: Images are not to scale.
Clearance Cable Slot
Thumb
Screw
2” Height Stand
P/N:225 P/N:225--7591 7591--04 04
Holes to secure
Verifone®
VX810
terminal to
stand (Screws
included in kit)
Cable
Management Hole
Bottom Bottom
Top Top
4. Secure the stand’s tilt adjustment as desired by
tightening the two side thumb screws on the
mounting plate on each side of the stand.
5. Make cable connections as needed . Guide cable
connections down and out through the bottom
opening.
For parts and/or additional accessories, contact your supplier or visit our website at www.mmfpos.com
TTS-11 Inst . Sheet (11-6-2011)
COPYRIGHT BY MMF POS
COMPANY, WHEELING, IL
TOOLS AND HARDWARE REQUIRED
• One (1) Allen Wrench is included with kit to tighten the
button head cap screws from behind the mounting plate.
• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.
• Phillips Head Screwdriver or power drill will be required
to mount stand to surface (if necessary).
R
e
p
la
c
e
m
e
n
t
P
a
r
t
s
Thumb Screw
P/N: 225-76901-04
SPECS
Rotation: 180°around display pole
Overall Height & Tilt Adjustment (without Terminal) :
•30⁰ Tilt= 4 ¾” high
•45⁰ Tilt= 5 ½” high
Pole Diameter: 2”
Base Dimensions: 5” x 5”
Construction: 18 gauge Steel
Finish: Textured powder coat
Cable Management: Designed with openings for easy and convenient
cable access and routing.
Color: Black
Designed for
Verifone® VX810