MMF POS USB Interface with Serial Emulation - Manual (Page 3)

USB Interface with Serial Emulation Interface Instruction manual / User Guide
MMF POS Date of Revision 5-1-2010 Doc. Serial Emulation Instruction Manual
P/N: 531-9209-00
MMF OPOS DRIVER V1.9 INSTALLATION
STEP 1
Install MMF OPOS Driver V1.11, available under: http://www.mmfpos.com/drivers
FIGURE 1.2
 The user installing the MMF cash drawer software
and configuring the cash drawer devices on Windows
2000 and Windows XP is required to have
Administrator Rights. Once the software is installed,
all users with normal rights can use it.
STEP 2
If using CD, open the file named MMF OPOS
1.11
To install the driver run the file: Setup.exe.
The program will ask you to unzip, click Unzip.
» After download is completed, go to “Start”
Menu
» Go to “All Programs”
» Select the “MMF Cash Drawer” program
» Select the “Configure and Test” program
STEP 3
Open the “Configure and Test” program and click on “Configure Device”. (See Figure 1.2)
STEP 4
To configure drawer - click on “Add new drawer” (See Figure 1.3). A window will appear asking you to enter a
name for your cash drawer, name it: Cash_Drawer#1 (See NOTE). Select the option of “Standard Serial
Interface with Drawer Status” as the Cash Drawer Interface (See Figure 1.4) and click “OK” to save settings.
FIGURE 1.3
NOTE: The name Cash_Drawer#1 is
case and character sensitive.
FIGURE 1.4