Boss Audio Systems BR-1600CD User Manual
Page 10
10
Synchronizing the BR-1600CD to Another BR Series Device or MIDI Sequencer
3. Press [EXIT/NO] several times to return to the top
screen.
4. If you want to record using the slave device, press
[REC] on the slave BR-1600CD at this point so the
button flashes red (recording standby mode).
Do not press [PLAY] at this time.
Additionally, you do not need to press [REC] if you only
want to play back the data.
5. Start playback with the master device (press [PLAY] on
the BR Series device).
By receiving MTC from Master unit and recognizing
automatically, and synchronized playback also starts on
the slave BR-1600CD. If the slave was put in recording
standby in Step 4, then recording also begins.
It may take several seconds immediately after playback
starts for synchronization to stabilize. The pitches of
sounds recorded or played back during this interval may
be unstable. Leave about one measure of blank space
before the beginning of songs or other such points at
which you want synchronization to start.
6. To stop playback or recording, stop the MIDI
sequencer.
The slave BR-1600CD stops simultaneously.