MOTA Anti-Lost Companion - Manual (Page 6)

Anti-Lost Companion
with Bluetooth ® 4.0
Notes:
You must have one or more ringtones available on your mobile device in order to
select a custom ringtone in the app.
The Near / Far distance will vary depending on where the MOTA Anti-Lost
Companion is used. The range of the connection between the Anti-Lost Companion
and your mobile device will be shorter in a building with interior walls compared
to an area with no obstructions.
Adding a Second Item to Be Protected
Swipe the BLE Anti-Lost app's Welcome screen to the right or left, and then
connect a second Anti-Lost Companion to your mobile device following the steps
above..
Using the MOTA Anti-Lost Companion
1. When the Anti-Lost Companion and your mobile device exceed the Near / Far
distance, the Anti-Lost Companion and your mobile device will sound an alarm to
indicate they are out of range.
If your mobile device's GPS function is enabled, you may see where connection
was lost by pressing the Map icon in the center of the BLE Anti-Lost screen.
Note:
Location accuracy may vary due to your mobile device's reception of the GPS
signal.
Tip:
You can mute the alarm by pressing and holding the Pairing Button on the
Anti-Lost Companion.
2. When your mobile device is back within working range, it will re-connect to
the Anti-Lost Companion. The BLE Anti-Lost screen will then display “In Range”
and the alarm will silence.
Note: If the re-connection does not happen automatically, press and hold the
Pairing Button on the Anti-Lost Companion. The Companion and your mobile
device will then enter Pairing Mode and re-connect.
4