MotorGuide Pinpoint GPS - Manual (Page 25)

PRODUCT INSTALLATION AND OPERATION
eng
19
Adjusting Motor Speed
If heading lock mode is selected from manual mode, the trolling motor will run at the
last selected speed. The motor speed can be manually adjusted in heading lock
mode by pressing the increase speed (+) button or decrease speed (–) button. The
trolling motor will emit two beeps when the user tries to exceed the available motor
speed limits.
Adjusting the Heading
While in heading lock mode, the heading can be adjusted by pressing the left turn or
right turn
buttons on the handheld remote. The trolling motor will resume heading
lock navigation based on the new trolling motor heading.
OPERATING IN ROUTE MODE
Route mode has the ability to store and recall user‑defined routes. These routes can
be recorded and recalled by the user from any operating mode.
!
WARNING
Avoid serious injury from colliding with other boats, running aground, or striking
objects in the water. The Pinpoint GPS system cannot detect other boats, shallow
water, or objects in the water. Always beware of possible obstructions to navigation
when operating in any Pinpoint GPS mode.
a - Memory buttons (1–8)
b - Route playback
c - Route record
53021
c
b
a