MTS Series 242 Actuators - Manual (Page 27)

Installing a Fixture to the Actuator
Series 242 Actuator Product Information Installation 27
Pedestal Base Mounting Holes
The previous figure shows the thread specifications. To install a swivel mounting
accessory, thread the swivel into the mounting hole and tighten the hex nut to 108
N·m (80 lbf·ft).
1/2-20 UNF-2B x 1.0 in
(25.4 mm)
4 holes, 0.28 in (7.11 mm)
Pedestal Base
diameter through deep