MTS Shouldered Tensile Grips-1000 kN - Manual

Copyright information © 2010 MTS Systems Corporation. All rights reserved.
Trademark information MTS is a registered trademark and MTS Fundamental is a
trademark of MTS Systems Corporation within the United
States. These trademarks may be protected in other countries.
Contact information MTS Systems Corporation
http://www.mts.com/en/Global/index.asp
ISO 9001 Certified QMS
Specifications
Model F-JLT305A1 F-JLT605A1 F-JLT106A1
Maximum Load (kN) 300 600 1000
Specimen Diameter
(Gage section) (mm)
Φ12.5 Φ12.5 Φ12.5
Specimen ASTM A370 FIG.5 specimen3/ specimen4
Jaw Face Shoulder Shoulder Shoulder
Temperature Range (°C) 0 to +50
Saline Tolerant No
Immersion Proof No
Shouldered Tensile Grips
300 kN /600 kN /1000 kN
http://support.mts.com
MTS Fundamental
™
Accessories
100-230-740