MTS Tensile Grip Face-300 kN - Manual

Copyright information © 2010 MTS Systems Corporation. All rights reserved.
Trademark information
MTS is a registered trademark and MTS Fundamental is a
trademark of MTS Systems Corporation within the United
States. These trademarks may be protected in other countries.
Contact information MTS Systems Corporation
http://www.mts.com/en/Global/index.asp
ISO 9001 Certified QMS
Specifications
Model F-JL305A1 .01-01 .01-02 .02-01 .02-02 .02-03
Specimen (mm) 2-13 13-25
Φ6-Φ12 Φ12-Φ20 Φ20-Φ32
Maximum Load (kN) 300
Specimen Hardness (HRC)
≤40
Height (mm) 80
Width (mm) 75
Wedge Face Flat Flat Vee Vee Vee
Wedge Face Thickness (mm) 38 32 37 34 33
Wedge Face Weight
(single) (kg)
1.405 1.122 1.355 1.196 1.118
Temperature Range (°C) 0 to +50
Saline Tolerant No
Immersion Proof No
Tensile Grip Face, 300 kN
http://support.mts.com
MTS Fundamental
™
Accessories
100-230-713