MTS Tensile Grip Face-600 kN - Manual

Copyright information © 2010 MTS Systems Corporation. All rights reserved.
Trademark information MTS is a registered trademark and MTS Fundamental is a
trademark of MTS Systems Corporation within the United
States. These trademarks may be protected in other countries.
Contact information
MTS Systems Corporation
http://www.mts.com/en/Global/index.asp
ISO 9001 Certified QMS
Specifications
Model F-JL605A1 .01-01 .01-02 .02-01 .02-02 .02-03
Specimen (mm) 2-16 16-30
Φ10-Φ20 Φ20-Φ30 Φ30-Φ40
Maximum Load (kN) 600
Specimen Hardness (HRC)
≤40
Height (mm) 90
Width (mm) 100
Wedge Face Flat Flat Vee Vee Vee
Wedge Face Thickness (mm) 42.1 35.1 40 36 33
Wedge Face Weight
(single) (kg)
1.786 1.414 1.645 1.401 1.218
Temperature Range (°C) 0 to +50
Saline Tolerant No
Immersion Proof
No
Tensile Grip Face, 600 kN
http://support.mts.com
MTS Fundamental
™
Accessories
100-231-438