MTS Series 505G2 SilentFlo Hydraulic Power Unit Model 505G2-11 - Manual (Page 69)

Lifting Kit
Model 505G2.07/.11 SilentFlo™ HPU 69
7. Open the locknut. Slowly open the regulator shut-off valve until the pressure
indicator on either the high or low charging kit pressure gage begins to rise.
When the pressure is at the required pressure level, close the regulator shut-
off valve.
8. Close the locknut.
9. Open the bleed valve on the charging kit and remove the chuck valve from
the accumulator.
10. Install the valve stem cap and protective cover. Close the valve on the
nitrogen bottle.
Lifting Kit
The balance of the load unit can become unsettled.
The weight of the HPU can injure you or damage the HPU if it should
become unbalanced and fall off the lift.
Before moving the HPU, test the balance of the lift by raising the HPU a short
distance off the ground.
The lifting kit (part number 100-036-287) includes support brackets, slings, chain
connectors, eyebolts, and hardware to allow the hydraulic power unit to be lifted
and moved by an overhead device (such as an overhead crane). The support
brackets and slings help distribute the weight of the HPU so it is balanced when it
is lifted.
CAUTION