MTS Hydraulic Service Manifold Model 293-12B - Manual (Page 39)

Control Manifold Front View
Description Item
Low Pressure Solenoid 1
High Pressure Solenoid 2
Hydrostatic Bearings Supplied Pressure 3
Pressure 4
Hydrostatic Bearings Controlled Pressure 5
Return 6
Pilot return 7
Drain 8
Pilot Pressure 9
Depending on the model, the high/low solenoids may be powered by either 115 VAC or 24 VDC. The
following figure shows the pin assignments of each connector.
• The Model 293.22A contains 24 VDC control power. The 3-pin connector for the high/low solenoids is
shown below.
• The Model 293.22B contains 115 VAC control power. The 3-pin DIN connector for the high/low solenoids
is shown below.
Series 293 Hydraulic Service Manifold Product Information | 39
Installation