MTS Acumen Electrodynamic Lift and Move Guide - Manual (Page 2)

© 2013 MTS Systems Corporation. All rights reserved.
Trademark Information
MTS is a registered trademark and MTS Acumen is a trademark of MTS Systems Corporation within the United
States. These trademarks may be protected in other countries.All other trademarks or service marks are property
of their respective owners.
Proprietary Software
Software use and license is governed by MTS’s End User License Agreement which defines all rights retained
by MTS and granted to the End User. All Software is proprietary, confidential, and owned by MTS Systems
Corporation and cannot be copied, reproduced, disassembled, decompiled, reverse engineered, or distributed
without express written consent of MTS.
Software Verification and Validation
MTS software is developed using established quality practices in accordance with the requirements detailed in
the ISO 9001 standards. Because MTS-authored software is delivered in binary format, it is not user accessible.
This software will not change over time. Many releases are written to be backwards compatible, creating another
form of verification. The status and validity of MTS’s operating software is also checked during system verification
and routine calibration of MTS hardware. These controlled calibration processes compare the final test results
after statistical analysis against the predicted response of the calibration standards. With these established
methods, MTS assures its customers that MTS products meet MTS’s exacting quality standards when initially
installed and will continue to perform as intended over time.