MTS Model 286-20 Confining Pressure Intensifier - Manual (Page 27)

Operating Procedures
286.20 Pressure Intensifier Operation 27
Operating Procedures
The operating procedures, which follow, are presented in the usual order of
occurrence. The first,
“Filling the Reservoir From An External Source” on page
28, assumes the reservoir is to be filled for the first time, or that fluid quantity in
the reservoir needs to be replenished. Subsequent procedures assume that the
condition of the system is as established by the successful performance of the
immediately preceding procedure.
Hydraulic power will be applied during some operating procedures.
Conditions hazardous to life and equipment exist on all systems or
equipment that might be connected to the same hydraulic power source.
Before turning on hydraulic power, first make sure that all systems or equipment
that use the same hydraulic power source are in appropriate condition for
application of hydraulic power.
Make certain no one is performing work on other systems or equipment sharing
the same hydraulic power source. Inform other people in the vicinity that you are
about to turn on hydraulic power.
WARNING