Bravetti PLATINUM PRO BKS600 - Manual (Page 5)

4
1. Always unplug the appliance and let the blade come to stop before cleaning.
2. Never immerse the appliance into water.
3. Adjust the supporting plate to setting '0' before cleaning.
4. To clean the blade, remove the blade cover by sliding upward (Fig. 8). The blade
cover has latches to engage both with motor assembly and blade. Remove the blade
by turning the blade knob 90 degrees clockwise (Fig. 9) and pulling outward (Fig. 10).
5. The blade, blade cover, food press plate and food tray can be washed and then dried.
Be careful when cleaning the blade as it is extremely sharp. Do not touch the sharp
edge by hand.
6. For thorough cleaning, pull out the motor assembly from the motor housing (Fig. 11).
Clean the outer surface of the motor assembly by a dry cloth only. Never immerse
the motor assembly in water.
7. For feeder, supporting plate, base and motor housing, clean the outer surfaces by a
damp cloth. Use domestic cleaning detergent for worse dirt. Do not use sharp
objects to remove the dirt as it will damage the coating on surface.
8. After cleaning, put back the motor assembly on the motor housing. Install the blade
and blade cover on motor assembly in reverse order of step 4. Make sure the blade
cover is properly engaged.
CLEANING INSTRUCTIONS
CAUTION: Blade is sharp. Handle carefully. Do not wash in dishwasher.
Do not immerse the main unit in liquid. Do not remove the lubricant from the
gears