Changing battery, Cleaning – Brinkmann Solar Max Solar Powered L.E.D. Garden Accent Light User Manual

Page 6

Advertising
background image

Top Housing

Lens

Battery

Changing Battery

Step 1

Remove lens from top housing by
turning lens clockwise.

Step 2

With top housing upside down (solar
panel facing down), push tab on battery
compartment lid and remove the lid.

Step 3

Remove battery. Replace with new Ni-Cd
rechargeable battery.

Step 4

Replace battery compartment lid.

Step 5

Attach the lens by aligning the tabs with
the slots in top housing. Turn counter-
clockwise to lock in place.

NOTE:

These lights utilize L.E.D. (Light
Emitting Diode) technology. There
are no bulbs to replace.

Top Housing

Battery Compartment Lid

It is important that the solar panel is kept free
of dirt and debris. A dirty solar panel will not
allow the battery to fully charge. This will
shorten the life of the battery and cause the
light to malfunction. Clean regularly with a
dampened cloth or paper towel.

Cleaning

5

IMPORTANT:

The EPA Certified RBRC

®

Battery

Recycling Seal on the nickel-cadmium (Ni-Cd)
battery contained in our product indicates The
Brinkmann Corporation is voluntarily participating in
an industry program to collect and recycle these
batteries at the end of their useful life, when taken
out of service in the United States or Canada. The
RBRC

®

program provides a convenient alternative to

placing used Ni-Cd batteries into the trash or the

municipal waste stream, which may be illegal in your area. Please call 1-800-8-
BATTERY™ for information on Ni-Cd battery recycling and disposal
bans/restrictions in your area. The Brinkmann Corporation’s involvement in this
program is part of our commitment to preserving our environment and conserving
our natural resources.

Tabs

INSTR_Legacy II 2/4/02 10:49 AM Page 5

Advertising