Purenex Multipure Aquasource - Manual (Page 9)

7
b. Make sure that all 3 cartridges are fully inserted, and that the white gasket around
the filter cartridge nipple is in complete contact with the receptor hole.
NOTE: All 3 filter cartridges must be used for proper function of the Multipure Aquasource.
Failure to properly insert all 3 filter cartridges may result in water bypassing the filters and
passing through the Multipure Aquasource unfiltered.
4. Align the filter retention plate so that the connecting rod fits through the center hole
of the plate. Place the retention plate nut over the connecting rod and rotate
clockwise to securely tighten the retention plate over the 3 filter cartridges.
5. Inspect the flat opening surface at the top of the housing bottom. Make sure that the
silicone gasket there is undamaged and properly seated in the recessed groove.
6. Carefully place the housing lid on top of the housing bottom. Secure with the 8 I-bolts,
turning each clockwise to tighten.
7. Close the shutoff valve connected to the drainage valve.
8. Proceed to 1.3: Startup and Use of Your Multipure Aquasource Whole House Water
Treatment System to complete the installation.
90 Days - Satisfaction Guaranteed
If, for any reason, you are not completely satisfied with your Multipure Drinking Water System,
Multipure will refund 100% of the purchase price.*
Lifetime Warranty on Stainless Steel & Plastic Housing
The exterior stainless steel housing and plastic housing (canister) is warranted for use and will
be repaired or replaced at NO CHARGE.**
12 Months - Accessories Warranty
All exterior accessories provided by Multipure are warranted for use and will be repaired or
replaced at NO CHARGE.
Proof of Purchase Required (warranty begins from the date of purchase) * Shipping and handling fees excluded.
** Provided that filter has been replaced at least once a year.
Warranty