Multiquip VR36HA - Manual (Page 33)

VR-36HA • VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. 6 (06/13/06) — PAGE 33
VR-36HA — STEERING CYLINDER, REAR FRAME COMPONENTS & THROTTLE CONTROL
MODEL VR-36H
STEERING CYLINDER, REAR FRAME COMPONENTS & THROTTLE CONTROL
NO PART NO PART NAME QTY. SERIAL NO.
250 492586 LOCK NUT 5/8" NC 1
251 506167 PLASTIC WASHER 2
252 506154 SAFETY LOCKOUT BAR 1
253 506109 WASHER 5/8" 1
254 503982 HEX. HEAD SCREW 5/8" NC x 2" G5 1
255 506233 RUBBER LOCK 1
256 492388 HEX. HEAD SCREW 3/8" NC x 3 ¼" G5 1
257 491687 COTTER PIN 2
258 506255 CLEVIS PIN 2
259 510229 * ENGINE THROTTLE CONTROL 1
260 506196 ELBOW 2
261 506215 FITTING 2
262 492561 HEXAGONAL NUT ¼” NC 1
263 505389 CLAMP 1
264 507863 HYDRAULIC CYLINDER 1
265 506124 SLEEVE BEARING 1
266 925191 HAIRPIN COTTER 1
267 503958 HEX. HEAD SCREW ¼" NC x 5/8" G5 1
268 492280 ROUND HEAD SCREW 3/16" 24 NS x ¾" 3
269 CABLE 1
270 CASING 1
271 506222 HOUR METER 1
* NEW UPDATED THROTTLE CONTROL (LOCATED NEXT TO FORWARD/REVERSE LEVER. STARTING S/N 980601
NOTE: OLD THROTTLE CONTROL NO LONGER AVAILABLE
WHEN ORDERING PARTS, ALWAYS GIVE MODEL NUMBER AND SERIAL NUMBER OF UNIT.