Maintenance – Multiquip MVC88GH/GHW User Manual

Page 21

Advertising
background image

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 21

Checking and Replacing the V-Belt and Clutch

1. After 200 hours of operation, remove the upper belt cover to

check the V-belt tension. Tension is proper if the belt bends
about 10 mm when depressed strongly with finger between
shafts. Loose or worn V-belts reduces power transmission
efficiency, causing weak compaction and reduces the life of
the belt itself.

Checking Clutch

Check the clutch simultaneously with V-belt checking. With belt
removed, check outer drum of the clutch for seizure and "V"
groove for wear or damage with your eyes. Clean the "V" groove
as necessary. Wear of lining or shoe should be checked with
running check. If the shoe is worn, power transmission becomes
deficient and slipping will result.

Reinstalling the V-belt

Engage V-belt to lower vibrator pulley and push the V-belt to left
side of upper clutch and, in the same manner as in removal,
rotate offset wrench clockwise so that the V-belt goes back on.

Replacing the V-belt

Remove the upper and lower belt covers. Engage an offset
wrench (13 mm) or the like to vibrator pulley (lower) fastening
bolt. Engage waste cloth or the like at midway of V-belt on the left
side and while pulling it back strongly, rotate the offset wrench
clockwise so that the V-belt will come off.

CHANGING VIBRATOR OIL

1. When changing the vibrator oil, remove the drain plug

located at the bottom- right of the vibrator (Figure 5), and
simply tip the compactor to drain the oil. Note that the oil will
drain more easily while it is hot. Remember to use only
10W-30 motor oil when replaceing vibrator oil.

Figure 15. Air Cleaner

MAINTENANCE

NEVER attempt to check the V-belt with the engine running.
Severe injury can occur if your hand (Figure 6) gets caught
between the V-belt and the clutch. Always use safety gloves.

CAUTION

Whenever the compactor's vibration becomes weak or lost
during normal operation regardless of operation hours, check
the V-belt and clutch immediately.

CAUTION

Advertising