Multiquip MC3P - Manual (Page 24)

PAGE 24 —MIX N' GO MIXER — OPERATION & PARTS MANUAL — REV. #5 (1/07/05)
MIX N' GO MIXER — INITIAL START-UP (GASOLINE ENGINE)
Figure 26. Throttle Lever (Idle Position)
2. After the engine cools , move the throttle lever to the STOP
position (Figure 27).
Figure 27. Throttle Lever (Stop Position)
Stopping The Engine
Normal Shutdown
1. Move the throttle lever to the "TURTLE" (IDLE) position
(Figure 26) and run the engine for three minutes at low speed.
Emergency Showdown
1. Move the throttle lever quickly to the OFF position (Figure
28).
Figure 28. Throttle Lever (Stop Position)