Multiquip BP25H User Manual
Page 27
BP-25H GASOLINE VIBRATOR — OPERATION MANUAL— REV. #7 (12/19/07) — PAGE 27
BP-25H GAS VIBRATOR — PREPARATION FOR LONG -TERM STORAGE
For storage of the vibrator for over 30 days, the following is
required:
■ Drain the fuel tank completely, or add STA-BIL to the fuel.
■ Run the engine until the gasoline in the carburetor is
completely consumed.
■ Completely drain the oil from the crankcase and refill with
fresh oil.
■ Remove the spark plug, pour 2 or 3 cc of SAE 30 oil into the
cylinder and crank slowly to distribute the oil.
■ Slowly rotate the engine a few times with the starter rope and
install a new plug.
■ Pull out the starter rope slowly and stop at the compression
point.
■ Clean all external parts of the engine and frame with a soft
cloth.
■ Cover the unit and store in a clean, dry place.