Bosch 6000 - Manual (Page 6)

-6-
Functional Description and Specifications
Disconnect the plug from the power source before making any
assembly, adjustments or changing accessories. Such preventive safety
measures reduce the risk of starting the tool accidentally.
! WARNING
NOTE: For tool specifications refer to the nameplate on your tool.
SANDING
TUBE
RELEASE
LEVER
CLAMP
HOLDER
CONTOUR
VENTILATION
OPENINGS
VARIABLE
SPEED SWITCH
ON/OFF
SWITCH
DETAIL
PAD
HOOK & LOOP
PAPER
POWER CORD
MOTOR
BRUSHES
RUBBER
GRIP RING
GRIP
DIMPLES
FIG. 1
See diagram for proper way to
hold tool. The head of sander
will get warm as it is being
used. Please use care to make
sure ventilation openings are
not covered during use.
VENTILATION
OPENINGS
WARM AREA
Contour Sander
DM 2610919361 9/03 9/5/03 8:33 AM Page 6