Northern Connectors Hirschmann NR-Series Circular Connectors User Manual
Northern Connectors Hardware
Where metal is concerned,
you need our robust model.
Never down and out: the NR-series.
The impact-proof, fracture-proof, glass
fiber-reinforced housing of the NR-series
is practically indestructible. Because of
these highly robust characteristics, this
circular connector is able to excel, thanks
to its compact design, and can be used
in many ways on the basis of various
structural designs. The built-in housing
can be supplied with a flange if so desired
or for installation in a variety of PG and
metric threads and in all cases with freely
selectable cable output. Thanks to crimping
technology, it is also possible to use it
without any problems in installations that
are subject to a lot of vibration stress.
The highly resistant circular connector can
easily withstand extreme environmental
conditions as well as vibrations and is
therefore a preferred item in conveyor
installations. The transmission of control
and regulation signals, such as in hydraulic
and pneumatic systems, the drives of
machine tools as well as the connection
of small gears and pump drives are other
preferred task areas for the NR-series
which is also suitable for the connection
of shielded cables.
The NR-series can also be installed
very quickly and easily in industrial
conditions using crimping
technology – BO crimping with
strain relief is provided through
the insulation.
Additional information: The
installation, connecting terminal
and material of circular connectors
of the NR-series satisfy the
requirements of EN 175201-804.
344