En gl is h, Peaker connections, Peaker connections (bridged) – Bazooka Mardi Gras Series MGA4150 User Manual

Page 10: Caution

Advertising
background image

30 AMP X 2 MAX

+12V

GND

TURN

ON

REAR

FRONT

LEFT

RIGHT

2

2

CHIL

BRIDGED

MIN

4

30 AMP X 2 MAX

+12V

GND

TURN

ON

REAR

FRONT

LEFT

RIGHT

2

2

CHIL

BRIDGED

MIN

4

9

EN

GL

IS

H

Make the speaker connections using speaker wire that is at least 16 gauge or heavier.

As with any audio component, proper phasing of the amplifier and speakers is essential for

strong bass response. When connecting, make sure that positive (+) from the amplifier is
connected to the positive (+) of the speaker, and the same for negative (-).

S

PEAKER CONNECTIONS

4 Ohm

(2 Ohm Minimum)

4 Ohm

(2 Ohm Minimum)

4 Ohm

(2 Ohm Minimum)

4 Ohm

(2 Ohm Minimum)

S

PEAKER CONNECTIONS (BRIDGED)

The MGA amplifiers are capable of being bridged in a mono configuration. This feature
allows you the flexibility of using the amplifier to drive a ** subwoofer or a center channel.
In this configuration the amplifier sums the right and left channel to deliver one channel
(mono) output.

**CAUTION!

In the bridged mode, the amplifier must see the recommended minimum

impedance or higher. Any lower than the recommended minimum impedance will cause the

amplifier to overheat and possibly cause permanent damage to the amplifier!

8 Ohm

(4 Ohm Minimum)

8 Ohm

(4 Ohm Minimum)

Advertising