Opticon CHG 3101 - Manual

Quick Start Guide
• The CHG-3101 is a designated charging cradle for the OPR-3101 handheld laser scanner. This cradle
can also be used as a stand when the scanner is not in use.
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store in a safe place.
Introduction
CHG-3101
Copyright © 2007, Opticon All rights reserved.
Notice
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to
any electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect
damages, howsoever caused.
Caution and Warning
Handling Instructions
【 CHG-3101 】 CHG-3101 】 】
• Do not attempt to disassemble, modify or update this product.
• Do not drop this product or put heavy items on this product.
• Do not insert foreign substances into this product.
• Do not use this product in the following areas:
- In areas exposed to direct sunlight for long periods of time.
- In dusty environments.
- Near water or other liquids, or in extremely high humidity.
- Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.
- Near microwaves, medical devices, or low-power radio stations.
• If water or any metallic object gets into this product and if you detect smoke or a strange smell coming from the
device, please stop operating the unit and contact your nearest dealer.
• When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild detergent.
【 Battery Pack 】 Battery Pack 】 】
• Do not attempt to disassemble this battery.
• Do not expose the battery pack to liquids or allow the battery contacts to get wet.
• Do not expose the battery pack to heat sources, including other devices that produce heat.
• Do not short the power leads on the battery pack. If the (+) and (-) terminals come in contact with metals (such as a
necklace or hairpin), a short-circuit will occur.
• Do not load the battery pack with its (+) and (-) terminals reversed.
• If you come into contact with material from a leaking battery pack, take the following actions:
- If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek medical attention.
- If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water.
Consult your physician if inflammation or soreness develops.
• Check local regulations for proper battery disposal.
No. Part Function
①
Power Supply
Status LEDs
Used to alert users to the status of power distribution
between the AC adapter and the cradle.
②
Charging
Status LEDs
Used to alert users to the charging status of the
battery.
③ Battery Pocket Set the battery in this pocket to charge up it.
④ Charging Terminals Used for power distribution and power management.
⑤ DC Jack
DC-6V power supply jack
⑥ Serial Label
■ Detailed View
Overview
■ CHG-3101 Basic Specifications
Parameter Specifications
Physical
Features
Size (H)115 × (W)100 × (D)185 mm Max
Weight 250g Max
Color Light Gray
Control
Section
Power
Management IC
Constant-current, constant-voltage charger
with automatic temperature control feature
Power
Supply
Section
Operating
Voltage
5.7V to 6.3V
Dedicated AC Adapter: 6.0V
± 5%
Current
Consumption
Standby : 25mA or less (when not charging)
Max. : 750mA (when charging)
Charging Time About 5 hours
Power Feed
Section
For Charging
the OPR-3101
Output: DC 5.6V (Typ. )
Terminals: +, - and Power Feed Control
Battery Charging
Section
For Charging
the Battery Pack
Output: DC 4.2V (Typ. )
Terminals : + and -
Durability Operating Temp. 0 deg. C to 40 deg. C
Operating Humidity 25% to 85% (non-condensing)
Storage Temp. -20 deg. C to 60 deg. C
Storage Humidity 20% to 90% (non-condensing)
Vibration
Endurance
Increase the frequency of the vibration from 10
Hz to 100 Hz with accelerated velocity 19.6m/s2
for 6 minutes each in X-, Y- and Z-direction.
Repeated this test for 10 times in each direction.
Shock
Endurance
Dropped 6 times onto concrete from a
height of 75 cm with no defects found.
Anti-static Electricity ± 15kV (no destruction)
* Some of the product specifications are related to the specifications of the OPR-3101.
■ AC Adapter Basic Specifications
Parameter Specifications
AC Adapter Product No. GP-ACGN-13T-K4-2
Input
Power Voltage : AC 90V to 264V
Current Consumption : 0.2A Max
Output
Power Voltage: 5.7V to 6.3V
Peak Current : 0.75A Max
Before Getting Started
No. Items Product No. Function
1 Cradle CHG-3101 Designated charging cradle for the OPR-3101.
2 AC Adapter GP-ACGN-13T-K4-2 Designated AC adapter for the CHG-3101.
3 Quick Start Guide 5J0084 Provides product information and instruction guide.
■ What's in the Box
Please confirm that you have the following items before getting started:
Note: The number of accessories may differ depending on the product specification.
Please contact the nearest dealer if accessories are damaged or missing.
Using the Cradle
■ LED Notification
Status LEDs Color Function
Power
Supply Red Turn solid RED when the main power
is ON.
Charging
Green
Turn solid GREEN when the cradle
detects a fully charged battery. If the
battery is not detected or if the battery
is not set correctly in the battery pocket,
one of the LED turns solid Green and the
other LED flashes RED once in every 3.5
seconds.
Red
Turn solid RED while the battery is being
charged. Depending on the remaining
battery level, the LEDs may turn
ORANGE first and then change to RED.
■ Charge Function
❶ Set the designated battery in the battery pocket to charge up the
battery. Make sure that the charging terminals of the battery con-
tact the charging terminals in the bottom of the battery pocket.
❷ If the cradle detects the battery built into the scanner while the
other battery pack is inserted in the battery pocket, the cradle
charges the scanner battery first. If the cradle is ready to charge
the battery pack, the Charging Status LEDs turn solid RED.
❸ It takes about 5 hours to fully charge an empty battery.
※ If you try to charge the battery pack with the ambient
temperature outside the range of 0 to 40 degrees C, the cradle
may stop the charging operation to protect the battery pack.
※ Please clean the charging terminals of the scanner on a
regular basis.
memo
5J0084A
The Netherlands Opticon Sensors Europe B.V.
tel: +31 (0)23-5692700 / email: [email protected]
U.S.A. Opticon Inc.
tel: 800-636-0090 / email: [email protected]
France Opticon S.A.S.
tel: +33 (0)1-41461260 / email: [email protected]
Germany Opticon Sensoren GmbH
tel: +49 (0)6074-91890-0 / email: [email protected]
Italy Opticon s.r.l.
tel: +39 (0)051-6321800 / email: [email protected]
Spain Opticon Sensores S.L.
tel: +34 (0)902-747469 / email: [email protected]
Contact
Sweden Opticon Sensors Nordic AB
tel: +46 (0)8-58548560 / email: [email protected]
United Kingdom Opticon Limited tel: +44 (0)1582-635100 / email: [email protected]
Taiwan Opticon Far Eastern Ltd.
tel: +886 2-27597444 / email: [email protected]
China Opticon Sensors Europe B.V., Shanghai Representative Office
tel: +86 21-64480881 / email: [email protected]
Australia Opticon Sensors Pty. Ltd.
tel: +61 (0)2-43402666 / email: [email protected]
Brazil Opticon Sensors Europe B.V., Latin American Office
tel: +55 11-5081 2088 / email: [email protected]
Please contact OPTICON or your local dealer.
More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com.