Opticon OPH 1003 - Manual

Quick Start Guide
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store in a safe place.
Introduction
OPH-1003
Notice
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or con-
verted to any electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or
indirect damages howsoever caused.
Caution and Warning
1. Laser Safety
• Do not stare into the laser beam.
2. Handling Instructions
【 OPH-1003 】 OPH-1003 】 】
• Do not attempt to disassemble, modify or update this device.
• Operating the scanner while operating machinery or a vehicle can be distracting.
• Do not drop this product or put heavy items on this product.
• Do not insert foreign substances into the device.
• Do not use this product in the following areas:
- In areas exposed to direct sunlight for long periods of time.
- In dusty environments.
- Near water or other liquids, or in extremely high humidity.
- Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.
- Near microwaves, medical devices, or low-power radio stations.
• When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild detergent.
【 Battery Pack 】 Battery Pack 】 】
• Do not attempt to disassemble this battery.
• Do not expose the battery pack to liquids or allow the battery contacts to get wet.
• Do not expose the battery pack to heat sources including other devices that produce heat.
• Do not short the power leads on the battery pack. If the (+) and (-) terminals come in contact with metals
(such as a necklace or hairpin), a short-circuit will occur.
• Do not load the battery pack with its (+) and (-) terminals reversed.
• Check the local regulations for proper battery disposal.
( Please refer to the specification manual and instruction guide for details.)
■ Detailed View
Overview
■ OPH-1003 Basic Specifications
Parameter Specifications
Physical
Features Size (W) 55 × (D) 23 × (H) 136 mm Max
Weight 140 g Max (excluding battery)
Color Black
Control
Section
MAIN CPU
32bit RISC CPU
Built-in ROM : N/A
Built-in RAM : 64KB
Clock frequency : 24MHz, 12MHz, STOP
External
Memory FLASH ROM 2MB
SRAM 2MB
Extended FLASH ROM 64MB
LCD
Section Material FSTN semi-transparent LCD
Backlight White LEDs
Active Area 33.58mm × 8.38mm
Number of
Dots 112 dots × 128 dots
Dot pitch : 0.30mm
Other Display
Section LED Bi-color LED (Red and Green)
Buzzer Tone and loudness can be configured.
Operation Section Keys 22 keys
Scanning
Section Light Source Red laser diode
Wavelength 650 ± 10nm
Light Output 1mW or less
Scan Rate 100scan / sec
Supported
Symbologies
JAN/UPC/EAN (WPC) incl. add on,
Chinese Post, Codabar/NW-7, Code
11, Code 39, Code 93, Code 128,
IATA, Industrial 2of5, Interleaved
2of5, ISBN-ISMN-ISSN, Korean Postal
Authority code, Matrix 2of5, MSI/
Plessey-UK/Plessey, RSS, S-Code,
Telepen, Tri-Optic, Composite codes
Power
Supply
Section Main Power Supply Lithium-ion battery (3.7V, 1100mAh)
Backup Power Supply Lithium secondary battery
Operating Time 50 hours
Data Retention Time 7 days
Comm.
Section
IrDA
IrDA Ver1.2
Baud rate : 2400bps to 115.2kbps
Clock
Section Real Time
Clock (RTC) Support year, month, day, hour,
minute, second. (leap year supported)
Durability Operating Temp. -10 deg. C to 50 deg. C
Operating Humidity 20% to 85% (non-condensing)
Storage Temp. -20 deg. C to 60 deg. C
Storage Humidity 20% to 85% (non-condensing)
Charging Temp. 0 deg. C to +40 deg. C
Ambient
Light Immu-
nity Incandescent Light : 4,000 lx
Fluorescent Light : 4,000 lx
Sunlight : 80,000 lx
Dust- and Drip-proof IP54
Shock En-
durance Dropped 18 times onto concrete from a
height of 150cm with no defects found.
Copyright © 2007, Opticon All rights reserved.
No. Item Function
1 Portable Terminal A laser portable terminal with a barcode scanning feature.
2 Lithium-ion Battery Pack Designated battery pack for the OPH-1003.
3 Strap
4 Quick Start Guide Provides product information and instruction guide.
Before Getting Started
■ What's in the Box
Confirm that you have the following items before getting started:
* The number of accessories may differ depending on the product specification.
Please contact the nearest dealer if accessories are damaged or missing.
No. Part Function
① LCD
Indicates the status of program
execution, scanned data and so
on.
②
Status LED
(Red and Green) Alerts users the status of scanning
operation and data communication.
③ Optical Window
The scan engine emits a laser beam
through the optical window while
scanning a barcode.
④ SCAN Key Starts a barcode scanning operation.
⑤ POWER Key Turns ON or OFF the power.
⑥
IrDA
Communication
Window This portable terminal communicates
with the designated cradle through
the IrDA communication window.
⑦ Buzzer Hole
Buzzer sounds through the buzzer
hole.
⑧ Battery Cover Protects the battery pack.
⑨
Charging
Terminals Electrical terminals for power distri-
bution and power management.
⑩ Strap Hook
・To avoid communication problems between the portable
terminal and a cradle, keep the IrDA communication
window clean.
・The IrDA communication performance may decline The IrDA communication performance may decline
due to excessive ambient light especially under
strong sunlight or inverted fluorescent light.
Memo