Opticon H22 - Manual (Page 109)

H-22 User Manual
109
19. Clean boot and Factory Reset
19.1. OS factory reset/Clean boot
A clean boot is when the system is started from the beginning and all drivers and settings are loaded
to their initial state. All custom settings are erased. The Custom ROM and FlashDisk partitions are
left untouched.
To perform an OS factory reset:
1. Tap > Settings > System > Factory Reset.
2. Enter the Device password (default 1234).
3. Tap OK.
An OS factory reset can also be performed by pressing Volume Up, Volume Down
(left) when the device is powered on or the reset button is pressed.
19.2. Device Factory reset
Device Factory reset is when all customer settings and data are wiped from the internal memory
including CustomROM and FlashDisk partitions and the system is reinitialized as if it was the first
boot. This can be used to solve problems when the device is not functioning as expected or if the
device should be used in another environment to ensure no old setting will cause incompatibility.
This is performed by pressing Scan key (left) and Scan key (right) when the device is turned on o
reset.
CAUTION: A device Factory reset will remove all data on custom ROM and flash disk. This cannot
be undone.
20. Downloadable tools (not in image)
20.1. Custom ROM Tool
The Custom ROM Tool is a tool to copy files to the hidden Custom ROM partition, view the
of the Custom ROM partition, and provide a way to format the Custom ROM partition. The Custom
ROM Tool is not a part of the built in applications. Instead it is available for customers on request
20.2. Autorun.exe
The Autorun.exe implemented by Opticon will expose a way for the customer to install CAB
run provisioning XML, and run executables aimed for configuration in a structured way. It is also
possible for the customer to develop their own version of the Autoexec.exe. The Autorun.exe is
placed in the Custom ROM area and will then perform the tasks described above at start of the
device. It is also possible to develop a custom Autoexec.exe and place in the Custom ROM area to
perform company specific tasks at startup.
Opticon
22 User Manual
A clean boot is when the system is started from the beginning and all drivers and settings are loaded
to their initial state. All custom settings are erased. The Custom ROM and FlashDisk partitions are
ume Down and Scan key
Factory reset is when all customer settings and data are wiped from the internal memory
including CustomROM and FlashDisk partitions and the system is reinitialized as if it was the first
when the device is not functioning as expected or if the
device should be used in another environment to ensure no old setting will cause incompatibility.
when the device is turned on or
: A device Factory reset will remove all data on custom ROM and flash disk. This cannot
The Custom ROM Tool is a tool to copy files to the hidden Custom ROM partition, view the content
of the Custom ROM partition, and provide a way to format the Custom ROM partition. The Custom
ROM Tool is not a part of the built in applications. Instead it is available for customers on request
will expose a way for the customer to install CAB-files,
run provisioning XML, and run executables aimed for configuration in a structured way. It is also
Autoexec.exe. The Autorun.exe is
placed in the Custom ROM area and will then perform the tasks described above at start of the
device. It is also possible to develop a custom Autoexec.exe and place in the Custom ROM area to