Opticon OPL 9724 Bluetooth Print - Manual (Page 9)

GRAPHICAL DEMO APPLICATION - PAGE 9
PRINT DEMO TEC B-SP2D (B LUETOOTH )
Appendix: Making a bluetooth connection
A connection between the OPL9724 and a bluetooth printer can be
established by taken the following steps.
The first step of setting up a connection between the OPL9724 and the
bluetooth printer is by making sure the bluetooth printer is on. Otherwise the
OPL9724 can’t find the bluetooth device.
The second step of setting up a bluetooth connection is to let the OPL9724
discover the printer. This should done as follows:
Go to the system menu of your OPL9724 by pressing all three buttons at the
same time.
Scroll down the system menu to the option: ‘Input address’ and select this
option.
In this menu, choose ‘Q2 discover’ (or choose Q1 to enter the address of the
bluetooth device manually)
The OPL9724 will now start to search for bluetooth devices that are nearby,
so make sure the OPL9724 is near the bluetooth device. This process will
take about half a minute
After this process you will be asked to select one of the discovered bluetooth
devices. Choose your bluetooth printer. (Which should be in the list, otherwise
your bluetooth device wasn’t activated or was incorrectly configured)
The next step of setting up a connection between the OPL9724 and the
bluetooth printer is setting the bluetooth PIN-Code of your OPL9724. This
should done as follows:
Go to the system menu of your OPL9724 again
Scroll down the system menu to the option: ‘Input PINcode’ and select this
option.
At this point you’ll be asked to enter the pin code. Because the bluetooth
printer doesn’t make use of a pin code you should clear the complete line with
dots only. This can be done by using navigation button 1 and 2.
Press the trigger key to confirm the entered pin code.
The OPL9724 bluetooth module should now be ready to connect with your
bluetooth printer.