Opticon PX 35 - Manual

The Netherlands Opticon Sensors Europe B.V.
tel: +31 (0)23-5692700 / email: [email protected]
U.S.A. Opticon Inc.
tel: 800-636-0090 / email: [email protected]
France Opticon S.A.S.
tel: +33 (0)1-41461260 / email: [email protected]
Germany Opticon Sensoren GmbH
tel: +49 (0)6074-91890-0 / email: [email protected]
Italy Opticon s.r.l.
tel: +39 (0)051-6321800 / email: [email protected]
Spain Opticon Sensores S.L.
tel: +34 (0)902-747469 / email: [email protected]
Contact
Sweden Opticon Sensors Nordic AB
tel: +46 (0)8-58548560 / email: [email protected]
United Kingdom Opticon Limited tel: +44 (0)1582-635100 / email: [email protected]
Taiwan Opticon Far Eastern Ltd.
tel: +886 2-27597444 / email: [email protected]
China Opticon Sensors Europe B.V., Shanghai Representative Office
tel: +86 21-64480881 / email: [email protected]
Australia Opticon Sensors Pty. Ltd.
tel: +61 (0)2-43402666 / email: [email protected]
Brazil Opticon Sensors Europe B.V., Latin American Office
tel: +55 11-5081 2088 / email: [email protected]
Please contact OPTICON or your local dealer.
More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com. PX-25019062-0-00
Parameter Specifications Remarks
Physical
Features
Size (H)140 X (W) 44 X (D) 26 mm
Weight Approx. 130g (incl. Lithium-ion Battery)
Control
Section
MPU 32 bit RISC microcomputer For Data
Internal Memory
ROM: 256KB + 16KB (for data)
RAM : 64KB
External
Memory
FLASH ROM 4MB For OS /AP
SRAM 2MB For Work / Data
Display
Section
LCD Semi-transmissive Dot Matrix LCD
No. of Dots 112 x 64 dots
Backlight White LEDs
Operation Section Keys 18 Keys: Numeric keys, Trigger key, BS key, Shift key, CLR key, ENT key, PW key, Up/Down keys
Others Section Status confirmation Buzzer and Tri-color LED (Red/Green/Blue)
Scanning
Section
Light Source/ Wavelength Red laser diode / 630nm
Optical Scheme
SXGA CMOS area sensor (1280 x 1024 pixels)
Supported Symbologies
(2D)
PDF417, Micro PDF417, QR Code, Micro QR Code, Codablock F, Data Matrix(ECC 0-140,ECC200),
Maxi Code(mode 2to 5), Aztec Code, Composite Code, Intelligent Mail Barcode
Supported Symbologies
(1D)
EAN, JAN, UPC-A/UPC-E, Industrial 2 of 5, IATA, Interleaved 2 of 5, NW-7(CODABAR), CODE-39,
CODE-93, CODE-128, MSI/Plessey, RSS Code
Wireless
Communication
Section
Specifications Bluetooth Ver.1.2
Supported Protocol SPP, GAP
Output Level
Class 2 (4dBm or less)
Connection 1 PX-25 : 1 BT device (host)
Operation Mode Master mode / Slave mode
Comm. Distance 10m may be shorter depends on the environment
Security Authentication and encryption available
IrDA Specifications Ver.1.2, Baud rate: 2400bps to 115.2kpbs * * Theoretical value
Clock Section Real Time Clock YYYY/MM/DD hh:mm:ss Clock (leap year supported) accurate within 90 seconds per month
Power Supply
Section
Main Battery Lithium-ion secondary battery (1800mAh) BTR0400(sold separately)
Backup Battery Manganese silicon lithium rechargeable battery (3.4mAh) For RAM/RTC backup
Operating Time Approx. 25 hours When scanning once every 5 seconds at room temperature with
a new and fully-charged main battery with always-on Bluetooth.
Charging Method Connects to AC adaptor or the dedicated cradle
Charging Temp. 0 to 40 deg.C
Charging Time approx. 7.5 hours by cradle or AC adapter
Data Retention Time 72 hours or longer after fully discharged
Durability Operating Temp. -10 to 40 deg.C
Operating Humidity 20 to 85 % (non-condensing)
Storage Temp.
-20 to 60 deg C
Storage Humidity 20 to 85 % (non-condensing)
Ambient Light
Immunity
Fluorescent : up to 10,000lx
Sunlight: up to 100,000lx
Dust-and Drip Proof IP42
Shock Endurance
Dropped 3 times from each of 6 angles onto concrete from a height of 150cm with no defects found. (Total 18 times)
Static Electricity 15kV (no destruction)
Overview
■ PX-25 Basic Specifications
Quick Start Guide
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store it in a safe place.
Introduction
PX-35
Notice
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages
howsoever caused.
Caution and Warning
1. LED Safety
• Do not stare into the LED light from the optical window. It may cause damage to your eyes.
2. Use of the Product
Radio frequency energy from wireless devices may affect some sensitive electronic medical equipment. In order to avoid
interference with the operation of this equipment, wireless devices should be switched off when requested in hospitals,
clinics, or health care facilities.
3. Handling Instructions
【 PX-35 】
• Do not attempt to disassemble, modify or update this device.
• Operating the device while operating machinery or a vehicle can be distracting.
• Do not drop this product or put heavy items on this product.
• Avoid static electricity
• Do not use this device near combustible materials.
• Do not store this device in an extremely cold or hot environment.
• Scanning performance may decline due to excessive ambient light.
• Do not swing the device around by the strap.
• Do not insert a sharp object into this device.
• Keep the device out of the reach of small children.
• When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild detergent.
• Do not use this product in the following areas:
-In areas exposed to direct sunlight for long periods of time.
-Near water or other liquids, or in extremely high humidity.
-In dusty environments.
-Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.
-Near microwaves, medical devices, or RF-emitting devices.
-In areas where dew condenses.
-In any other areas where serious damage is considered to occur.
【 Battery Pack 】
• Do not attempt to disassemble this battery.
• Do not expose the battery pack to liquids or allow the battery contacts to get wet.
• Do not expose the battery pack to heat sources including other devices that produce heat.
• Do not short the power leads on the battery pack. If the (+) and (-) terminals come in contact with metals (such as necklace
or hairpin), a short circuit will occur.
• Do not load the battery pack with its (+) and (-) terminals reversed.
• Check the local regulations for proper battery disposal.
4. Radio Equipment
• Do not peel off the certification label.
5. Bluetooth
• Bluetooth® is a registered trademark owned by Bluetooth SIG, Inc., U.S.A. and is used by OPTICON under license.
• This product supports Bluetooth wireless communication with other Bluetooth devices that have the same profile.
• This product complies with Bluetooth version 2.0; however, its communication performance with equipment other than
cradles or devices stated in this manual is not guaranteed.
• Bluetooth devices use the 2.4 GHz frequency band. Scientific, medical, and industrial devices, including radio stations,
microwave ovens, wireless security (camera) systems and WLAN use the same frequency band as this product. Interference
from other devices may affect the communication speed or communication range of this scanner or vice versa.
(Please refer to the specification manual and instruction guide for details.)
Copyright © 2008, Opticon All rights reserved.
ご 使用にあたって System Menu
■ System Menu Screen
No. Part Function
① Optical Window
CMOS imager which reads 1D &
2D barcodes.
②
IrDA Communication
Window
Port to communicate with the
designated cradle.
③ LED
Indicates the status of scanning
or communicating.
④ LCD
Indicates the operating function
and scanned data.
⑤ Trigger / Scan Key
Starts the barcode scanning
operation.
⑥
DC jack
with rubber cap
To connect the dedicated AC
adapter for charging.
⑦ Buzzer Hole
Buzzer sounds through the
buzzer hole.
⑧ Product Label
⑨ Charging Terminals
Connects the dedicated cradle
for charging.
⑩ Battery Cover Protects the battery pack.
⑪ Battery Cover Lock Locks the battery cover.
⑫ Strap hook To attaches the strap.
Overview
■ Detailed View
■ Key Layout
Key Function
Trigger/ Scan Scans a barcode.
UP Select a menu.
(these keys can be programmed for the
user's application.) DOWN
ENT Determines the input.
BS Deletes one letter before the cursor.
CLR Cancels an input.
0-9, .
10 numeric keys to input numbers, alphabets
or symbols.
SHIFT Shifts from number input mode to alphabet
input mode and vice versa.
* The layout of keys may differ depending on the product specification.
No. Item Product No. Function
1 Scanner PX-25 Data collector with Bluetooth
2 Lithium-ion rechargeable battery BTR0400 Dedicated for PX-25
3 Hand strap −−−−−−−
4 Quick Start Guide PX-25019062-0-00 Provides product information and instruction guide
Before Getting Started
■ What s in the Box
Confirm that you have the following items before getting started:
* The number of accessories may differ depending on the product specification.
Please contact the nearest dealer if accessories are damaged or missing.
Numeric
keys
UP DOWN
Trigger/
SCAN
ENT
①
②
⑥
⑫
③ ⑧
⑨
⑩
⑪
④
⑤
⑦
（*Please refer to the system menu instruction guide for details of default settings)
The system menu screen starts when turning the power
on. If you do not have user applications, then "figure
1" appears on the screen. Use the Up or Down keys to
move, then Trigger or ENT key to choose the menu. To
move back to the top screen, push the CLR key.
■ Function List
□ figure 1
SYSTEM MENU
Restart
Power off
Download appl.
Upload appl.
SYSTEM MENU
Settings
Diagnostics
List files
Show version
CLEAR
SHIFT
BS
* To connect the cradle to a host using a dedicated USB cable, you must first install a dedicated USB driver on the host.
* Please refer to the specification manual or the instruction guide for details of designated cradles.
Designated Cradles (Optional )
CRD-9723
Communication &
Charging Cradle
Communication Method
(Cradle to Host)
Communicates with the host via
RS-232C or USB interface.
Size (H) 67.5 × (W) 71.5 × (D) 98.5 mm Max
Weight 85g Max (excluding AC adapter and cable)
Charging Time Approx. 7.5 hours RS-232C USB
Line-up of CRD-9723 series:
- single-bay cradle (1 x charging, 1 x communication)
- multi-bay cradle (5 x charging, 1 x communication)
- multi-bay cradle (5 x charging, 5 x communication)
Charging Cradle CRD-9722:
- single-bay cradle (1 x charging, no communication)
System menu Function
Cancel Returns to the application to resume user activities.
Restart Closes the main menu to restart the application. When no application loaded, the system menu will start.
Download appl. Application can be downloaded and started after the succesfull installation.
Set contrast Adjust display, brightness and contrast.
Show version Displays the version of OS, ROM, Bluetooth and MDI (scan engine).
List files Displays the contents of the RAMdisk and has option to format RAMdisk.
Terminal id Sets and confirms the terminal id.
Diagnostics Tests (and sets conditions where applicable) in a fixed sequence: 1. Display, 2. Memory, 3. Time & Date, 4. Keypad, 5. Scanner
Input address Sets Bluetooth address
Input PINcode Sets Bluetooth PINcode
BLT Local name Sets Bluetooth local name
BLT com port Sets Bluetooth com port
MDI download Updates scan engine software
ご 使用にあたって Battery Pack
■ How to Insert or Exchange a Battery
STEP 3 STEP 2 STEP 1
Firstly open the battery
cover.
STEP 2 STEP 1
Put the battery cover back
and confirm if the cover is
firmly locked.
STEP 3
Confirm the direction (indicated on the surface
of the battery pack) and insert the dedicated
lithium ion battery pack in the battery bay.
AC/DC Adapter (Optional )
Size (H) 75.0 × (W) 47.5 × (D) 28.0 mm max
Input
Power Voltage AC 90V to 265V
Supply Current 0.5A max
Output
Power Voltage 5.7V to 6.3V
Maximum Current 2.0A max
Charging Time Approx. 7.5 hours
To recharge the battery, AC/DC adapter (SFP0602000P-PSE) can be directly connected to the PX-25.
* The System Menu may be revised or withdrawn at any time without prior notice.