Orbit Baby Stroller Panniers - Manual (Page 4)

6
6
Using Y
our Panniers
Using Y
our Panniers
7
7
The Panniers can be attached onto the Orbit
Stroller on either side of the SmartHub™ ring.
Attaching the Panniers
1. Lift up on the Locking Carry Handle to open
the Pannier Clamps.
3. Position the Pannier Clamps over the
triangular tubes at the sides of the Stroller
frame (Photo A).
4. Lower the Locking Carry Handle until it
touches the Pannier Frame, closing the
Pannier Clamps on the Stroller Frame (Photo
B). Make sure Pannier is securely attached by
gently lifting up on the Pannier Frame.
Removing the Panniers
1. Make sure the Pannier Frame is unfolded, in
its horizontal position.
2. Lift up on the Locking Carry Handle to open
the Pannier Clamps (Photo C).
3. Lift the Pannier fully off of the Stroller with the
Locking Carry Handle.
Attaching & Removing Your
Panniers
The Panniers can be collapsed and then folded
on the Stroller when not in use.
Folding the Panniers while on the Stroller
1. Pull both ends of the black Clip together and
fasten, collapsing the Pannier (Photo D).
2. Press the two Folding Buttons at the same
time to fold the Pannier Frame downwards,
against the Stroller (Photo E).
Unfolding the Panniers
1. Lift the Pannier Frame until it clicks at the
horizontal position.
2. Release Clip to expand the Pannier.
Collapsing & Folding Your
Panniers
1. Pull out the Rain Fly from the Rain Fly Pocket
and spread it over the Pannier opening.
2. Choose from three sets of Button Holes
depending on height of goods in your
Pannier. Fit the Button Holes over the Rain
Fly Anchors (Photo F).
Using the Rain Fly
A
B
C
D
E
F