Oxford Garden Round 67 Dining Table - Manual (Page 2)

The Oxford Garden 67” Round Dining Table has seven
component parts – one Table Top (A), four Legs (B), one
Pedestal Base (C) and one Parasol Hole Cap (J).
Tools needed for assembly — two allen wrenches,
(provided) and one hex head wrench (provided).
To assemble:
1. Lay Table Top (A) upside down on a clean, flat
surface.
2. Place the bolts of each leg (B) through the frame of
Table Top. Secure with washers (D) and nuts (E).
Tighten with hex head wrench (G) provided.
3. Lay pedestal base (C) onto four legs, inserting the
pegs from each leg into holes in pedestal. Insert
one barrel nut (I) into hole on the side of a leg. Align
the barrel nut to receive the machine bolt (F) as you
screw the machine bolt through the pedestal base
(H) and into the leg. Tighten with allen wrench (H)
provided.
4. Carefully turn table upright and enjoy.
RD67TA - Round 67” Dinning Table
5
2
3
4
1 F
G
H
A
C
B
B
B
B
D
E
I
I
I
I